EZEE Shed® Floor Frame Kit
EZEE Shed® Floor Frame Kit is rated out of 5 by 16.
Jump to a section...
Do you have questions about this product? Our Customer Service team is here to help!
Create the perfect barrier between the ground and the floor of your EZEE Shed unit. The EZEE Shed Floor Frame Kit is the perfect addition to your EZEE Shed. Made from strong, durable HDG Steel® hot-dipped galvanized steel, it creates the perfect foundation for you to add any floor to your EZEE Shed unit. Compatible with the 6 x 5 ft., 8 x 7 ft., and 10 x 8 ft. EZEE Shed units. Floor frame kit only - floor not included.
- HDG Steel® - Hot-dipped galvanized steel for corrosion and rust resistance
|Assembly Manual||Download (PDF)|
|Manufacturer||Arrow Storage Products|
|Material||Hot Dipped Galvanized Steel|
|Assembled Exterior Dimensions Width||115.17 in.|
|Assembled Exterior Dimensions Depth||88.95 in.|
|Assembled Exterior Dimensions Height||1.09 in.|
Rated 5 out of 5 by Gil from Great Product Purchased this kit for storage shed. Dimensions were right on. No problem with installation.
Date published: 2018-09-28
Rated 5 out of 5 by roadrunner from easy to assemble !!! easy to assemble, can adjust depending on size of shed. just be careful. edges are sharp !!
Date published: 2018-09-24
Rated 5 out of 5 by Dolar99 from It fits perfectly Well built, easy to assembly. It adds support and stability to the shex5
Date published: 2018-05-04
Rated 5 out of 5 by Dschmoo from Easy floor Purchased for a shed we moved from another house. Great fit, easy to put together.
Date published: 2017-09-10
Rated 5 out of 5 by Jackbroke from Easy Assembled Made a difficult job easier to handle. Took the guess work out of the job.
Date published: 2017-05-01
Rated 5 out of 5 by Suzal from Floor frame kit easy to install I am very pleased with this product. It saved me from purchasing a whole new shed. Easy to install. Great product
Date published: 2017-01-30
Rated 4 out of 5 by MaryO from Basic and lightweight Directions were limited and basic. Seems flimsy, hope it holds weight better than it looks.
Date published: 2019-12-28
Rated 4 out of 5 by Handywoman from Great option for floor in shed I purchased the floor frame kit instead of incurring the cost of pouring concrete. It was easy to install.
Date published: 2019-03-20
Questions & Answers
Why does it say not to build my 4’x10’ shed around the floor frame? Why can I not put the frame down on the dirt, make sure it is level and then build the shed?
Hello, The Floor Frame Kit is the final assembly part and includes frame channels that will be inserted after the shed has been erected. This is used to slightly raise a plywood floor off of the ground (plywood not included). Please note this is not a base kit. Base kits are assembled prior to the shed. The base kit is assembled with your selected floor finishing option before you start to build your shed. Both are different accessories. The floor frame kit/base kits are not needed if you already have a concrete slab (as your base) to place the shed. If you would like to discuss this in more detail, please feel free to contact us at 1-800-851-1085 (press 1). Thank you
Date published: 2021-06-14
How many sheets of 4' x 8' plywood do I need for the 10 x 12 floor kit?
Hello, Per the instruction manual, you will need (4) sheets of plywood for a 10X12 unit. A 5/8” Minimum Thickness and needs to be Exterior Grade plywood. Please Note: Pressure Treated Lumber must not be used where it will make contact with your Arrow Products. The properties of Pressure Treated Lumber will cause accelerated corrosion. If Pressure Treated Lumber comes in contact with your Arrow Models your warranty will be voided. If you have any other questions, please feel free to contact us at 1-800-851-1085 (press 1). Thank you
Date published: 2022-01-07
How high does the Floor Frame Kit raise the plywood off of the ground? I am considering using this on my concrete pad, but water may pool up about 1/2 inch and I want to make sure the plywood will not be soaking in water if it rains hard.
Hello, The Floor Frame-kit slightly raises a plywood floor off of the ground. It is a rough measurement of about 1" inch or so. To discuss this in more detail, please feel free to call us at 1-800-851-1085 (press 1). Thank you
Date published: 2022-01-07
Can you connect two of the 10 x 12 Arrow Floor Frame kits together lengthwise?
This frame could be used for any brand than Arrow
Date published: 2021-06-12
What model for would need for a 10 x 10 shelter logic shed.
Hi Michael, This kit has been designed for our Arrow Storage sheds and is not compatible with our Shelterlogic models. To discuss in more detail please give us a call at 1-800-932-9344.
Date published: 2020-05-27
Can this be used to strengthen the walls of a Newport 10x8?
Hello, You will need Floor Frame Kit Model #FB109-A. https://www.shelterlogic.com/shop/floor-frame-kit-for-arrow-8x8-10x7-10x8-10x9-and-10x10-sheds
Date published: 2021-04-27
Hi. My son and I just completed the construction of the 10 x 14 shed. It is on a dirt surface in the backyard. I would like to add more strength/rigidity, given the winds we get. Does the floor frame kit connect directly to the existing base pieces?
Hello, Yes, the floor frame kit is installed on the Inside of the shed, after the shed is built on the ground. The channels connect to the side base frames on the upper inside edge. Thank you!
Date published: 2020-07-11
I am placing the Arrow 4x7 shed over gravel, I plan to put cinder blocks in the corners and the middle of the long side. I plan on putting a wood floor in. Do I need the Base Kit AND the Floor Kit? Not very clear here what I'm going to need.
Hello, You do not require both the Base Kit and the Frame Kit. The Base Kit will raise the shed off of the ground 2” and with the Floor Frame Kit the shed is on the ground. If you have any additional questions or concerns feel free to start a live chat or give us a call at 1-800-851-1085 (press 1). Thank you
Date published: 2022-01-07